SONATOR™ 80’s

  • The SONATOR™ 80’s is a medical device and is designed for use with removable overdentures or partial dentures retained in whole or in part by endosseous implants in the maxilla and mandible.

Product Characteristics:

  • Available for INNO SLA-SH® Submerged Implant and Internal Implant.

  • Various sizes and shapes of SONATOR™ 80’s system allow to restore diverse clinical cases.

  • 6 kinds of Inner Cap allow various holding power.

  • Self-locating design of the SONATOR™ 80’s system allows dentures to easily and safely be seated.

  • Easy to place and remove male components with I&R Driver.

  • Retrofitting SONATOR ™ 80’s to existing complete denture is possible.

  • Restorations are possible even in cases of limited space due to low vertical height.

  • Compatible with other implant systems compatible with INNO SLA-SH®.

  • Submerged and Internal Implant.

  • All in one packing for convenience.

Sonator S Abutment

  • For Implant Supported Over-denture Prosthesis.

  • Packing Unit : Sonator S Abutment + Carrier + 3 H-Type Inner Caps + Outer Cap + Block-out Spacer + Black Processing Male.

  • 6 types of Inner Caps give various holding force(Both, H and NH-Type Inner Caps are used for Sonator S Abutment).

  • Path Compensation up to 40 ° based on 2 Implants

  • Carrier : Used for delivery of the abutment.

  • Tightened with Ratchet Driver with tightening torque Force : 30N/cm.

  • Abutment Level Impression.

Sonator A Abutment

  • 6 kinds of Inner Caps give various holding force (Both, H and NH-Type Inner Caps are used for Sonator A Abutment).

  • Stable with Low Vertical Height.

  • Path Compensation up to 40 ° based on 2 Implants.

  • Carrier : Used for delivery of the abutment.

  • Connected with Abutment Screw(2SSHR300).

  • Tightened with 1.2 Hex Driver and Torque wrench.

  • Tightening Torque Force : 30N/cm.

  • Abutment Level Impression.

  • Packing Unit : Sonator A Abutment + Abutment Screw + Carrier + 3 NH-Type Inner Caps + Outer Cap + Block-out Spacer + Black Processing Male.

OUTER CAP

  • Black Processing Male: Inserted and Removed with I&R Driver.

  • Packing Unit : 2 Outer Caps and 2 Black Processing Male.

H-Type Inner Cap

  • Path Compensation up to 40 ° based on 2 Implants.

  • Mainly used for Sonator S Abutment.

  • Inner Caps: Inserted and Removed with I&R Driver.

  • Packing Unit : 3 Block-out Spacers + 3 Inner Caps (1 Blue , 1 Pink and 1 White).

NH-TYPE INNER CAP

  • Path Compensation up to 20 ° based on 2 Implants.

  • Mainly used for Sonator A Abutment.

  • Inner Caps: Inserted and Removed with I&R Driver.

  • Packing Unit : 3 Block-out Spacers + 3 Inner Caps (1 Red , 1 Orange and 1 Green).

Impression coping

  • For close tray impression.

  • Connected over the Sonator S&A Abutment after placing the Block-out Spacer.

  • Packing unit: 4 Sonator Impression Copings and 4 Black Processing Males.

Sonator Lab Analog

 

  • Replacement of abutment shape in working cast.

  • Packing unit: 4 Sonator Lab Analogs.

Sonator I&R Driver:

  • Used to insert and remove the Inner Caps and Block Processing Male.

  • Packing unit: 1 Sonator I&R Driver.

SONATOR Ratchet Driver

  • Used to Tighten and Untighten Sonator S Abutment
Scroll to Top